Select "Force Calibration" in the pull-down menu under the "Calibration" menu in the menu of the electronic universal testing machine, and a dialog box will appear. At this time, enter the password to enter the calibration interface. In the first operation, the password is 123456, and you can directly select "OK". Then you will see the calibration interface on the right side of the interface. Press the [Calibration Settings...] button, and the test parameter modification interface will appear. Then select the force calibration settings, First enter the range, then select the number of calibration points, and then enter the calibration value you want. Press the "Start Calibration" button to enter the next interface, and you can start the calibration operation 

Calibration method: Place the mouse on the point you want to calibrate in advance, and then you will see that the selected point to be calibrated has a black dotted box, which represents the selected point. When the point to be calibrated is approaching, press the left button of the mouse directly when calibration is needed. Then, when calibrating the next point, and so on. After all points are calibrated, the system will prompt that calibration is complete 世俱杯竞猜网站:摩擦磨损试验机 世俱杯竞猜网站:端淬试验机 世俱杯竞猜网站:拉力试验机 世俱杯竞猜网站:材料试验机 世俱杯竞猜网站:电子试验机 扭转试验机

在电子设备耐压测试仪的菜單任选中"校验"菜單下的下拉菜單中的"力值校验",则会会会出现一两个聊天对话框,在此键入登录密码锁就也能够 实施校验软件接面,在第1 次启用时登录密码锁:123456,随时选取"明确"就也能够 了,第二步你则会在软件接面的右侧见到的校验软件接面,先键后[校验设制…]按钮图片开关,会会出现耐压耐压试验技术指标修改游戏的软件接面,第二步选取力值校验设制,先键入示值,第二步选取校验点数,第二步再键入我能的校验的值就也能够 了.键后"慢慢校验"按钮图片开关后,就实施下一两个软件接面了,就也能够 实施校验进行了. 　　校正方式:将方向键分批贴到你得校正的点上,此时此刻会看出被复制粘贴的要校正的点全是个藏青色的虚线框,什么就主要复制粘贴的点.在要校正的点马上要到的之时,想要校正时单独按着方向键的左键.又校正下某个点时,依或者推.因此的点都校正完后设计会显示,校正进行.